Multi-Station Subplates

Product range
▪ Cetop3 (NG6) 1 to 8 Stn
▪ Cetop5 (NG10) 1 to 8 Stn
▪ Cetop7 (NG16) 1 to 3 Stn
▪ Parallel flow path on all sizes
▪ Series flow path on Cetop3 and Cetop5
▪ Load sense on A and B ports on all sizes

Features and options
▪ Wide variety of mounting options
▪ Panel mount on both ends of Cetop3 and Cetop5
▪ Relief valve or standard cavity option in all sizes
▪ Ends matched to bolt to Hyteco Tank-top Adaptors
▪ Load sense models have the checks built in
▪ Identical layouts for Parallel, Series, Relief and LS models

 

Sandwiches

Product range
▪ Cross line relief
▪ Port relief
▪ Reducing/relieving
▪ Sequence
▪ Counterbalance
▪ Vented counterbalance
▪ Pilot check
▪ Check
▪ Flow control (meter in or out)
▪ Compensated flow control

Features and options
▪ Two mounting bolt options
▪ Subplates have extra side tank port
▪ Tank sealing gasket included

  Further topics:    Line Mount Manifolds
                             Sandwiches
                             Tank-top Mount Manifolds
                             Motor Mounted Manifolds

Tank-top Mount Manifolds

Product range
▪ Cetop3 (NG6) single subplate with relief
▪ Cetop5 (NG10) single subplate with relief
▪ Multi-station Cetop3 (NG6) adaptor with relief
▪ Multi-station Cetop5 (NG10) adaptor with relief
▪ Through P and T ports with relief

Features and options
▪ Machined 'o'ring recesses - no spacer plate needed
▪ Wide variety of non-stocked special application

Go to top

In addition to custom manifolds, we design, manufacture and supply a wide selection of industry standard manifolds, line mount manifolds, subplates, sandwiches and adaptors. Further below is a general overview of some of our Standard Products.
To view our Catalogue of Standard Products in detail, click here.

Our range of Standard Products is constantly expanding to suit customer needs and industry innovation. To view some of our New Products, click here.

Copyright © 1998-2002, Hyteco (Aust.) Pty Ltd  All rights reserved

Features and options
▪ Port adaptors to suit Char Lynn included
▪ Circuit options with different cartridges

Motor Mount Manifolds

Various styles
▪ Relief
▪ Flow control
▪ Solenoid poppet NO and NC
▪ Counterbalance
▪ Suit Char Lynn, H&S and 2000
▪ Suit Danfoss OMS, OMT

Hyteco Standard Products

Line Mount Manifolds

Product range
▪ Sequence with reverse flow check
▪ Single and dual pilot check
▪ Single and dual counterbalance
▪ Solenoid unloading relief
▪ Remote pressure vent unloading
▪ Pressure compensated flow control
▪ Flow control with reverse flow check
▪ Pilot relief with reverse flow check